Installation guide

24 | Rinnai Heating Specication Guide 02-13
Indoor Super Ray accessories: Heat shield
Rinnai Indoor Super Ray heat shield codes
Indoor Super Ray 16 Indoor Super Ray 24 Indoor Super Ray 40
WHS16 WHS24 WHS40
Description
Constructed from stainless steel and heat resistant insulator board, the Rinnai Super Ray heat shield acts
as a deflector and insulator when fitted to an Indoor Super Ray heater. This has the benefit of reducing
ceiling clearances, giving the owner flexibility about where the Super Ray heater can be positioned.
For example:
• Super Ray 16
Standard ceiling clearance is 1 m, with the heat shield this could reduce to 0.5 m.
• Super Ray 24 and 40
Standard ceiling clearance is 1.1 m, with the heat shield this could reduce to 0.6 m.
Please note:
Due to heat being deflected down and out, the side clearances need to increase from 0.5 m to 1.0 m.
Suitability
All Rinnai Indoor Super Ray (WMA/WEA) radiant heaters. Heat shield must be fitted to the Super Ray
prior to installation.
Not suitable for Outdoor Super Ray models as these already have an in-built heat shield.