Rinnai LSi Series Venting Brochure

ROLUX® CONCENTRIC VENT SYSTEM
PLASTIC OUTER FOR INTAKE
• Easy to cut compared to
stainless steel
• Dent and impact resistant
• Corrosion-proof
• Non-flammable material
(UL94-V0)
• Seamless extruded
materials
• Casted elbows and adapters
• White semi-gloss finish
(EU RAL 9016)
VERTICAL TERMINATIONS
1
184118-S
184127
Roof Discharge Termination 18” (above roof)
19
184119 Roof Discharge Termination 38” (above roof), cold climate
HORIZONTAL TERMINATIONS
2
223161
223155
12” Standard Horizontal Termination
223152 223156 21” Standard Horizontal Termination
20
223157
223159
12” All-Weather Horizontal Termination
223171 21” All-Weather Horizontal Termination
HORIZONTAL TERMINATION KITS
3
STDKITVA-S
223167
12” Standard Termination Kit (LS Series) *
(R94LSi, R75LSi, R50LSi)
STDKITVA-S21 21” Standard Termination Kit (LS Series)
(R94LSi, R75LSi, R50LSi)
22
STDKITVA-A
223168
12” All-Weather Termination Kit (LS Series) *
(94LSi, R75LSi, R50LSi)
STDKITVA-A21 21” All-Weather Termination Kit (LS Series)
(94LSi, R75LSi, R50LSi)
24
224046 Raised Horizontal Termination Kit (“Snorkel”)
(94LSi, R75LSi, R50LSi)
VENT PIPE EXTENSIONS
7
224051
224260
10” Vent Pipe Extension
224052
224265
19.5” Vent Pipe Extension
224053
224270
39” Vent Pipe Extension
8
224054
224275
Telescoping Vent Length
9
224063
224255
90 Degree Elbow
10
224050
224250
45 Degree Elbow (Qty of 2)
HORIZONTAL AND VERTICAL ADAPTERS FOR V SERIES
11
50710327
224257
Horizontal Discharge Adaptor
12
224064
224240
Vertical Discharge Adaptor (4” length)
13
224069
224245
Condensate Collector (6” length)
METAL OUTER FOR INTAKE
• Painted galvanized steel
• Easy to cut compared to
stainless steel
• Metal outer available when
required by local codes
• Dent and impact resistant
(bends and adapters)
• White semi-gloss finish
(EU RAL 9016)
• Wall thickness 15% greater
than stainless steel
• Casted elbows and adapters
ALUMINUM INNER
FOR EXHAUST
• Easy to cut compared
to stainless steel
• Stable, thick-walled material
• Dent and crease resistant
• Not affected by scratches
• Seamless extruded material
• No weld lines
• Thick-walled, casted elbows
and adapters
• Lightweight
• Seal rings with
maximum temperature
400°F (approx. 200°C)
1
19
Plastic outer Metal outer
131211
8
7
109
20
2
3
22
24
* Vent Kits for the V Series water heaters are available as well. The 12” standard termination kit is STDKITV-S and the 12” all-weather kit is
STDKITV-A