Installation Sheet

Installation & Servicing Instructions Rinnai E-Series
56
11.2 Activating factory settings (green button function)
To activate the factory settings again please follow the next procedure (Note: all altered
adjustments will be set back to their orignial factory settings that are accessible in the
current service level the boiler is in either user or 123):
- Select, when necessary, the technical read out;
- Select with the MODE-button chapter PARA;
- Press the STORE-button.
 Theword"Copy"willappearandthefactorysettingsareactiveagain.
12 Isolating the boiler
Somesituationsrequireturningtheentireboilero󰀨.
Byswitchingo󰀨thethreebuttonswiththeLED'sforcentralheating,hotwaterand
pump program (
, or ),theboilerisswitchedo󰀨.Donotshuto󰀨thepower
of the boiler, which means the circulation pump and the three-way valve are activated
once every 24 hours in order to prevent these parts from seizing up.
In the event of freezing danger with an isolated boiler it is advisable to drain
the boiler and/or the installation.
!
CAUTION