Installation Sheet

Installation & Servicing Instructions Rinnai E-Series
87
B.1 Low Loss Header
Rinnai supplies optional for each type of boiler a Low Loss Header. Find below the
dimensions.
2.0”
50mm
10.2”
260mm
12.5”
319mm
4.7”
119mm
9”
229mm
5.2”
131mm
14.2”
360mm
16.4”
416mm
16”
406mm
2.2”
55mm
5.6”
143mm
Plumbing Kit 1
Part. no.: 804000061
Suitable for:
E60SRN / E60SRP
E85SRN / E85SRP
E110SRN / E110SRP
plumbingkit1 gure3
Appendix B - Optional accessories
Low Loss Header
Clearancestocombustibleandnon-combustibleis0inchforsides,top,frontandoor/ground
The recommended service clearance to the bottom from the low loss header is 12 inches.
The plumbing kit is not intended to support the weight of the piping. Appropriate
piping supports should be used to support all attached piping to the boiler and
plumbing kit.
NOTICE
i