Setup Guide Spot light Cam Plus I Battery &OTI 111IIIIHi lfflllllI11111111111111111 22-003999-03
Quick Start 1. Download and open Ring app. Select Set Up a Device 2. Scan QR code with Ring app. Use this code or the one 01 your device to continue setup.
Hardware included @ Oi::::::::::::::::::i Security screw for metal collar @ ~ Mounting screws 83J1ll: e Wall anchors Tools needed [ cJt=:::::::===::,,,, ,- © Phillips-head screwdriver Drill (optional) 3
Remove the battery. Twist the battery compartment counterclockwise to unlock and remove the cover Then, remove the battery and discard the orange battery insulator. Charge the battery. Plug rt into a power source using the provided USB cable. Once the battery's fully charged, only one light on top will glow green.
Re-insert the battery. Slide the battery back into the camera until it clicks into place. Twist the battery compartment cover clockwise to lock it and tighten the security screw.
Choose a location with the view you want. Your camera can be mounted on an outdoor wall, eave, or overhang. For optimal motion detection: Mount the camera about 3 feet (1 meter) from the middle of the entry point, and about 10 feet (3 meters) above the ground. 3 ft (1 m) I· ..•• • • • I IP -. 1Oft 0 (3m) 0 .. ... .• .• . ..
If installing on a wall. .. Your camera comes ready to mount, with the ball joint pointing down. No adjustments are needed before installation.
If installing on an eave or overhang ... Remove the battery compartment cover by twisting it counterclockwise and insert the ball joint plate with the ball joint pointing up. Remove the mounting plate. Slide it down to remove it from the camera mount.
Install the mounting plate. For wall installation, the UP arrow should point up. For an eave or overhang, the arrow should point toward the area you want to monitor for motion. If installing on a wood surface, screw the plate directly into the wall. If installing on a masonry surface, mark four screw holes using the plate as a guide. f Drill pilot holes using a 1/4" drill bit. Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors.
Attach the camera mount. Slide it onto the mounting plate. Then, tighten the security screw.
Attach your camera to the camera mount. Loosen the metal collar on the bracket using a Phillips-head screwdriver (not included). Push the ball joint into the socket until it snaps into place.
Adjust the camera angle. Rotate the camera to focus on the area of your choice. Look at Live View in the Ring app to make sure it's positioned at your desired angle. Tighten the security screw. Then, tighten the screw on the metal collar to secure the camera position.
Free Ring Protect Plan for 30 days. Your new device comes with a free, 30-day trial of Ring Protect. This comprehensive subscription service lets you review, save, and share your video and photo history anytime so you never mrss a moment~ To continue using Rrng Protect after your free trial ends, visit ring.com/protect-plans to compare plans and pricing. "Your free tflol ,sn'c oppl,coble for locat,ons with on ex,stmg Rmg Protect subscnptton.
Adjust the camera angle. Rotate the camera to focus on the area of your choice. Look at Live View in the Ring app to make sure it's positioned at your desired angle. Tighten the security screw. Then, tighten the screw on the metal collar to secure the camera position.
For additional help, visit ring.com/ help Or give us a call us 1 800 656 1918 Canada 1 855 300 7289 Worldwide + 1 310 929 7085 For a 11st of al l our customer support numbers, visit ring.com/ callus For information on our warranty, theft protection, and Ring Protect Plans, visit ring.com/legal t£' 2022 Ring LLC or its affiliates. Ring and all related marks are trademarks of Ring LLC or its affiliates.
Warranty and Safety 111 11111111111111111IIIIIIIIIIIIIIIII Ill Ill 22-003998-04
IMPORTANT PRODUCT INFORMATION R\. l.D SAFETY INFORMATION: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE. WARNING: Improper installation may create risk of injury or damage to your device. Follow all mounting instructions and mount only on stable surfaces. Only use mounting hardware that is appropriate for your mounting surface to mount your device. Use caution when installing and mounting your device at an elevated position.
Product Specifications Device Name: Spotlight Cam Plus Model Number: 5E82E9 Elect rical Rating: Ring Battery or 5.0V DC Adapter Model: SF27E9 Adapter Made By: Lite-On Technology Corporation Temperature Rating: 4 'F to 120°F (-20°C to 48.5°C} ID I Class II apparatus RECYCLING YOUR DEVICE PROPERLY In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations.
When you purchase a new or Certified Refurbished Device, we warrant the Device against defects in materials and workmanship under ordinary consumer use for one year from the date of original retail purchase.
~))) ring .com/ callus Ring LLC 12515 Cerise Ave, Hawthorne, CA 90250 USA '~' 2022 Ring LLC or its affiliates. Ring and all related marks are trademarks of Ring LLC or its affiliates.
