Full Product Manual
9 10 11 12 13 14
Secure the wires to the terminals.
Loop each doorbell wire around the screw terminals
on the back of the doorbell, then tighten to secure.
It doesn’t matter which wire connects to which screw.
If the wires are too short to reach the doorbell, use
the wire extenders with the wire nuts found in Bag D.
At the end, feed all the wires (and wire nuts and
extenders if used) back into your wall.
For information on our warranty, theft protection,
and Ring Protect Plans, visit ring.com/legal
© 2022 Ring LLC or its aliates. Ring and all related
marks are trademarks of Ring LLC or its aliates.
CAUTION! You’ll be working with electrical wires
during the install process. If you are uncomfortable
or inexperienced with doing so, consult with a
licensed electrician. Do not wire your Ring Doorbell
to a DC-powered intercom system or other DC
power source.
Install your doorbell and connect to
an existing chime.
Your battery doorbell can be hardwired to work with
your home’s existing chime.
Before you start installing your doorbell, make sure to
shut o power at the breaker. If you’re not sure which
breaker controls your doorbell, turn o your home’s
master breaker or contact an electrician.
Once power is turned o, remove your existing
doorbell button from the wall and disconnect the wires.
Your Ring doorbell is compatible with doorbell systems
supplying 8–24 volts AC at 50 or 60Hz, 40VA max.
Optional: Install the corner mount.
If you’re installing a corner mount, remove the
corner bracket screws from Bag C.
Pull your home’s existing wires through the center
of the corner mount before installing on the wall.
If installing on a wood surface, screw the bracket
directly into the wall.
If installing on a masonry surface, mark two screw
holes using the bracket as a guide.
Drill pilot holes using a 1/4” drill bit. Insert the wall
anchors from Bag C, then drive the medium bracket
screws through the bracket into the wall anchors.
WARNING! Only use the included corner bracket
screws when securing the corner bracket.
CAUTION! Do not drill or drive screws into your
home’s electrical wiring.
Free Ring Protect Plan for 30 Days.
Your new device comes with a free, 30-day trial of
Ring Protect. This comprehensive subscription service
lets you review, save, and share your video and photo
history anytime so you never miss a moment.*
To continue using Ring Protect after your free trial
ends, visit ring.com/protect-plans to compare
plans and pricing.
*Your free trial isn’t applicable for locations with an existing Ring
Protect subscription. See ring.com/protect-plans to learn more
about your plan’s retention period.
Insert the battery and secure
the faceplate.
CAUTION! If you use the wrong screws to secure
the faceplate, you could damage the battery
during installation, create a fire hazard, and
be seriously injured.
DO NOT USE any screw other than the included short
security screws when securing the faceplate. Lastly,
use the included screwdriver to insert and tighten
one of the security screws from Bag B.
Your Ring doorbell is now ready to use.
The corner
bracket can be
painted to match
your home.
B
C
Insert the battery and secure
the faceplate.
CAUTION! If you use the wrong screws to secure
the faceplate, you could damage the battery
during installation, create a fire hazard, and
be seriously injured.
DO NOT USE any screw other than the included short
security screws when securing the faceplate. Lastly,
use the included screwdriver to insert and tighten
one of the security screws from Bag B.
Your Ring doorbell is now ready to use.
B
Mount your doorbell to the wall
or corner bracket.
Remove the short mounting screws from Bag A.
If installing on a wood surface, screw the doorbell
directly into the wall.
If installing on a masonry surface, mark 4 screw holes
using the doorbell as a guide. Drill pilot holes using
a 1/4” drill bit. Insert the wall anchors, then drive the
short mounting screws through the mounting plate
into the wall anchors.
If using a corner mount, use the short bracket screws
from Bag C to secure your doorbell to the bracket.
WARNING! Only use the included wall mounting
screws when securing the doorbell.
CAUTION! Do not drill or drive screws into your
home’s electrical wiring.
WARNING! Only use the included corner bracket
screws when securing the corner bracket.
A
C
ring.com/help
ring.com/callus