Full Product Manual

ManualsBrandsRing ManualsSmart DevicesBattery Doorbell Plus - Smart Wireless Doorbell Camera with Head-to-Toe HD+ Video, 2-Way Talk, Motion Detection & Alerts

2 3 4 5 6 7 8

Quick Start

1. Download and open Ring app.

Select Set Up a Device.

2. Scan QR code with Ring app.

Use this code or the one on your device

to continue setup.

QR+FR

Wall Mounting Screws

Wall Anchors

Security Screws

Corner Mount Hardware

Short Bracket Screws

Medium Corner Mounting Screws

Wall Anchors

Wire Nuts

Wire Extenders

Hardware included Tools included

Security Screwdriver

Tools needed

Phillips-head screwdriver

Drill (optional)

Setup Guide

Battery Doorbell Plus

Choose a location for your doorbell.

For the best results, mount the doorbell about

4 feet (1.20 meters) above the ground.

If you want to angle the doorbell down for a better

view, wedge kits are available at ring.com/accessories

Optional: Install the corner mount.

If installing on a wood surface, screw the bracket

directly into the wall.

If installing on a masonry surface, mark two screw

holes using the bracket as a guide.

Drill pilot holes using a 1/4” drill bit. Insert the wall

anchors from Bag C, then drive the medium bracket

screws through the bracket into the wall anchors.

WARNING! Only use the included corner bracket

screws when securing the corner bracket.

CAUTION! Do not drill or drive screws into your

home’s electrical wiring.

Remove the faceplate and fully charge

the battery.

Remove protective ﬁlm from device.

This ensures your device works properly.

Mount your doorbell to the wall

or corner bracket.

Remove the short mounting screws from Bag A.

If installing on a wood surface, screw the doorbell

directly into the wall.

If installing on a masonry surface, mark 4 screw holes

using the doorbell as a guide. Drill pilot holes using

a 1/4” drill bit. Insert the wall anchors, then drive the

short mounting screws through the mounting plate

into the wall anchors.

If using a corner mount, use the short bracket screws

from Bag C to secure your doorbell to the bracket.

WARNING! Only use the included wall mounting

screws when securing the doorbell.

CAUTION! Do not drill or drive screws into your

home’s electrical wiring.

WARNING! Only use the included corner bracket

screws when securing the corner bracket.

Install your doorbell without

connecting to an existing chime.

4 feet

(1.20 meters)

The corner

bracket can be

painted to match

your home.

A C

22-004555-02

Summary of content (2 pages)

PAGE 1
Setup Guide Quick Start Battery Doorbell Plus Hardware included 1. Download and open Ring app. Select Set Up a Device. Tools included A Wall Mounting Screws 2. Scan QR code with Ring app. Use this code or the one on your device to continue setup. Security Screwdriver Wall Anchors Choose a location for your doorbell. Remove protective film from device. This ensures your device works properly. For the best results, mount the doorbell about 4 feet (1.20 meters) above the ground.
PAGE 2
Insert the battery and secure the faceplate. Install your doorbell and connect to an existing chime. Optional: Install the corner mount. Your battery doorbell can be hardwired to work with your home’s existing chime. Pull your home’s existing wires through the center of the corner mount before installing on the wall. Secure the wires to the terminals. If you’re installing a corner mount, remove the corner bracket screws from Bag C.