Owner's Manual

Steps for wiring to an existing doorbell
Remove your existing doorbell. (optional)
If replacing an existing doorbell, shut off
power at the breaker. Then remove it from
the wall and disconnect the wires.
Your Video Doorbell is compatible with
doorbell systems supplying 8-24 volts AC
at SO or 60Hz, 40VA max.
8
Do not wire your V1oeo Doorbell to a DC-powered
intercom system or other DC power source.
Do you have an in-home chime?
The chime can ring when the button on
your Video Doorbell is pressed. Just follow
the in-app instructions during setup.
Don't have an in- home chime?
If you see the "No In-Home Chime" button
during setup, be sure to press it.
I NO IN-HOME CHIME I
To change your wiring settings after setup,
go to Device Settings > Chime Connection.
Also, consider purchasing a Ring Chime or
Chime Pro, which allows you to hear Ring
alerts fron, anywhere in your home.
6