Owner's Manual
Table Of Contents
- User Guide
- Where should you install Alarm Pro?
- Alarm Pro uses two apps
- Setting up Ring Alarm Pro
- Connecting to the Internet
- Set up your wifi
- Managing your wifi network
- Get external battery backup with a Ring Power Pack
- Add eero 6 Extenders
- Cellular internet options for Alarm Pro
- 24/ 7 Backup Internet
- Alarm Cellular Backup
- Subscribe to Ring Protect
- Add Ring Cameras and Video Doorbells
- Using Alexa with Alarm Pro
- Setting up your alarm system
- Understanding device codes
- Range Extender
- Contact Sensor
- Bypassing Sensors
- Motion Detector
- Keypad
- 24/7 Professional Monitoring
- Verbal Password
- Arming and disarming Alarm Pro
- How to Arm and Disarm
- Owners, Shared Users, and Guest Users
- When your Alarm Pro alarm system is triggered
- Adding Shared Users and Guest Users
- Managing alerts
- Preventing false alarms
- Ways to prevent false alarms
- Alarm Permits and Registration
- Adding permit information to the Ring app
- Important Product Information
Setup
and
install steps:
1.
Follow
the
directions in
the
app.
When
prompted,
plug
the Keypad
into
an
outlet
with
the
included
USB
cable and wall adapter.
2.
Give
your
Keypad a
unique
name
and
add
it
to
a
room.
Don't
forget, you
must
create a personal access
code
to
arm
and disarm
your
Alarm.
3.
The Keypad can
be
mounted
flush
on
a
wall
or
placed
on
a table, and can
be
left
plugged
in
or
run
on
its internal battery.
Note:
If
using
the
Keypad
unplugged,
charge
it
fully
before
first use.
To place
the
Keypad on a table, slide
the
bracket
off
of
the
Keypad, then
flip
the
bracket
over,
and
slide
it
back on
to
elevate
the
Keypad.
To install the Keypad on a wall, slide
the
bracket
off
the Keypad. Place
the
mounting
bracket
on
the wall, then
use
the wall anchors
and
screws
from your kit to
fasten
the bracket to
the wall. (If using anchors, you should pre-drill
holes.) Slide
the
Keypad
onto
the bracket.
II
23