Owner's Manual
Table Of Contents
- User Guide
- Quick Start
- Shut off power at the breaker!
- Prep your Floodlight Cam for installation
- Remove your existing floodlight
- Choose your screws
- Attach the metal mounting bracket
- Install the plastic mounting plate
- Hang it up
- Connect the wires
- Mount the light fixture
- Restore power at the breaker
- Complete setup in the Ring App
- Review, share and download
- What is Ring Protect
- Quick Start
- Important Product Information
8
Install the plastic mounting plate.
Pull gently from the opening of the plastic plate to free
it from the fixture, then feed your power wires though
the opening.
With your power wires fed through the mounting plate,
center it over the metal mounting bracket. If you’re
installing on a wall, the “UP” arrow should point up.
If you’re installing under an eave, it should point
towards the wall.
Then, insert one of the screws from Bag B or C into the
center hole, and tighten to secure.