Owner's Manual
Table Of Contents
- User Guide
- Quick Start
- Shut off power at the breaker!
- Prep your Floodlight Cam for installation
- Remove your existing floodlight
- Choose your screws
- Attach the metal mounting bracket
- Install the plastic mounting plate
- Hang it up
- Connect the wires
- Mount the light fixture
- Restore power at the breaker
- Complete setup in the Ring App
- Review, share and download
- What is Ring Protect
- Quick Start
- Important Product Information
2
WARNING: Risk of electrical shock.
Disconnect power at the fuse or
circuit breaker before installing.
Verify that the supply voltage is correct. Connect
fixture to a 100 VAC~240 VAC 50/60 Hz power source.
Properly ground fixture.
Always follow code standards when installing wired
connections.
CAUTION: Risk of fire. Do not install near combustible
or flammable surfaces.
NOTICE: Do not connect this light fixture to a dimmer
switch or timer.
Your Floodlight Cam must be installed on a 4” round
UL listed weatherproof electrical box.
This manual is for informational purposes only.
Working with electricity can be dangerous unless
proper safety precautions are taken. If you are not
comfortable or are inexperienced with the processes
and tools described in this manual, we recommend
that you hire a licensed electrician.