Owner's Manual

Test yoLJr Listener.
Now, it's time to head back to the Ring
app and go through the testing process.
When prompted, press the test button
on your smoke or CO alarm. If you're not
sure where it is, check the instructions.
The Ring app will tell you when your
Listener has detected the smoke or CO
signal from your alarm. If your alarm is a
smoke/CO combo, both smoke and CO
signals should be detected.
If your Listener is unable to
detect the signal, your
Ring Alarm cannot
monitor your
smoke or CO alarm.
This may mean your
alarm is too old and
must be replaced.
D