Owner's Manual

Upgrade a F oodlight
If you have an existing motion detecting
noodlight, you can replace its motion
sensor with your Spotlight Cam for a
massive upgrade!
To do s0
1
disconnect the wires
connected to the motion detector .
Then
1
unscrew and remove the motion
sensor from the floodlight and replace
it with the ,ncluded wiring harness.
With the floodl i ght in its normal install
position, make sure that the lock-
shaped symbols on the wiring harness
face up (for wall mounting) or toward
you (for eaves mounting) .
Then, wire it in, foil owing this diagram .
0
0
44
Total power draw of connected
lights must not exceed 150 watts.
For LED floodlight, connect Lhe red
wire from your Spotltghi. Can, to the
black wire on the LED driver circuit, then
connect wh' le to wnit12 .