Installation Guide

WARNING: Risk of
electrical shock
• Disconnect power at the
fuse or circuit breaker
before installing.
• Verify that the supply
voltage is correct.
Connect fixture to a 100
VAC~240 VAC 50/60 Hz
power source.
• Properly ground fixture.
• Always follow code standards when installing wired
connections.
• If you are outside of North America, installation and
wiring must be performed by a licensed electrician
CAUTION: Risk of fire
• Do not install near combustible or flamable surfaces
NOTICE
• Do not connect this light fixture to a dimmer switch
or timer.
Step 1– Shut power off
at the breaker
If you don’t know where your
breaker is or how to turn off
power to your floodlight circuit,
consult with a licensed electrician.
1110