User Manual

16 17
Mark the Holes
Using your Ring Doorbell
as a template, mark
the location of the two
mounting holes on your
wall.
Removing the Faceplate
To access the mounting
holes, first remove the
faceplate, like this:
2. Install your Ring Video Doorbell Pro
Install Anchors
(Optional)
If you’re installing on a hard
surface such as concrete,
stucco, or brick, use the
provided bit to drill two holes
in your wall, and push the
provided anchors into these
holes.
If you’re installing on wood or
siding, you can skip this step
and throw the anchors in that
drawer of stuff you never use.
2. Install your Ring Video Doorbell Pro