User Manual

10 11

2. Install your Ring Video Doorbell Pro

Everything needed for the installation is in the box.

Uninstall your Existing

Doorbell

Unscrew your existing doorbell from

the wall and disconnect its wires.

Don’t have an existing doorbell?

You can also wire Ring Pro directly to our plug-in adapter.

Visit the accessories section at ring.com to learn more.

Screwdriver - Use the Phillips end for the mounting screws and star-

shaped end for the security screw.

Drill Bit and Anchors - Use the drill bit with a power drill to drill holes

for the (optional) anchors if installing on concrete, stucco, or brick.

Mounting Screws - Use two to mount your Ring Doorbell. Use the

longer screws if you’re installing with the optional Retrofit Kit.

Security Screws - Use one to secure the faceplate.

Wire Extenders and Wire Nuts - Use to extend existing doorbell wires

(if needed).

Retrofit Kit - Use when upgrading from a battery-powered Ring Video

Doorbell, or as additional trim when upgrading from a conventional

doorbell.

2. Install your Ring Video Doorbell Pro