User Manual

18 19
Connect the Wires
Attach your existing doorbell wires to the terminals on the
rear of your Ring Doorbell, and tighten the terminal screws
with the Ring screwdriver.
If your doorbell wires are too
short, use the Wire Extenders and
Wire Nuts to extend them.
2. Install your Ring Video Doorbell Pro
Mount your Ring
Doorbell
Feed the wiring back into
the wall, and mount your
Ring Doorbell with the
included mounting screws.
If you installed one or
more angle wedges, use
the short screws.
Restore Power
at the Breaker
You’re almost there!
After turning power
back on, it’s time
to set up your Ring
Doorbell in the Ring
App.
2. Install your Ring Video Doorbell Pro