Owner's Manual

There’s a video on this whole process…
There’s a video in the Ring app on the installation process
outlined in this manual. We recommend watching that
first, and referring to this manual if you need extra help.
Select the + sign to Add a New Device (or tap Set Up a
Device), then select Video Doorbell Pro to access this video:
If you need
extra help…
Ring Community Support
is available 7 days a week,
and our online help center
is accessible 24/7.
Online Help Center:
ring.com/help
Ring Community Support:
1.800.656.1918
[e-mail]
4 Faceplates
Pick the one that
best matches your
home…or your
mood. Change it any
time.
Step 1
Say “Hello” to your Ring Video Doorbell Pro
Terminals
(attach your
existing wiring
here)
Back
Front
Setup
button
Mounting
holes
Step 2
Check out all the cool stuff in the box
1 Screwdriver - Use the Phillips end for the mounting
screws and star-shaped end for the security screw.
3 Anchors - For installing on concrete, stucco, or brick.
1 Drill Bit - To drill holes for the (optional) anchors.
3 Mounting Screws - Use two to mount your Ring.
2 Security Screws - Use one to secure the faceplate.
2 Extra Wires - To attach your existing wires to your Ring.
2 Wire Connectors - To connect the extra wires
(above) to your existing wires.
Install your Ring Doorbell Pro
2
2520AF
2 3 4 52 3 4 5