User Manual

How to connect a Ring Solar Panel
with a screw tab power plug:
Remove the two screws
next to the power port.
Be sure to save them, as
you’ll need them to secure
the power plug later.
Insert the power plug.
In most cases, the trailing
cable should point down.
Secure the plug.
Be sure to use the screws
you removed in the first step.
Using any other screws may
damage your Stick Up Cam.
That’s it! You’re done.
Remove the two
rubber spacers.
If necessary, you can use
the included screwdriver to
gently pry them out.
1716