User Manual

Final steps for all
mounting styles:
Attach the battery cover.
Line up the “open lock” symbol on the rear of your Stick Up
Cam with the line on the battery cover. Then push the cover
on and twist clockwise to lock it in place.
Now your Stick Up Cam is installed and ready to protect you.
If desired, add the battery security screw.
By default, the battery cover can be easily removed for
battery charging. However, if you want to secure it, add the
included security screw.
To do this, pull the rubber plug out of the cover and insert
the security screw. Finally, tighten it with the star-shaped
end of the screwdriver bit.
Battery Cover
Security Screw
1312