User Manual

Remove the plastic cover and
rubber pad from the base.
You’ll put the cover back on once
you’ve mounted your
Stick Up Cam.
Flip the base to the rear.
The base of the stand is hinged. Before wall-mounting, flip
the base down and behind your Stick Up Cam.
Push the rubber pad
back into the base.
The rubber pad should sit
between your wall and the
base of your Stick Up Cam.
How to install Stick Up Cam
on a wall:
Drive the screws.
Hold the round part of the
base against your wall,
rubber-side down. Use the
integrated level to ensure
it’s straight.
Then mount it with the
included screws.
Snap the cover back
onto the base.
Then, secure it with the
included base security screw,
using the star-shaped end of
the screwdriver bit.
98