Stick Up Cam Battery
1. Set up your Stick Up Cam. Charge the provided battery. = Charging = Charged First, fully charge the battery by plugging it into a USB power source using the provided orange cable. The battery is fully charged when just one LED is lit. Download the Ring app. The Ring app walks you through setting up and managing your Stick Up Cam. Search for “Ring” in one of the app stores below, or visit: ring.com/app Download from Windows Store Remove the battery cover.
Insert the battery. Insert the charged battery into the bottom of your Stick Up Cam until it clicks into place. 2. Install your Stick Up Cam. Now place the battery cover back onto your Stick Up Cam. Set up your Stick Up Cam in the Ring app. Choose a location. In the Ring app, select Set Up a Device. Stick Up Cam is happy just about anywhere, indoors or out. It comes ready to sit on a flat surface like a table or shelf, but can also be mounted to a wall.
Install the security screws (optional). How to use Stick Up Cam on a table or shelf: Your Stick Up Cam comes with two optional security screw locations. Insert the charged battery, then place it at your chosen location. Your Stick Up Cam is now ready to protect you. One secures the battery compartment, and the other secures the mounting bracket to the base. To use them, open the battery compartment and/or remove the mounting bracket, then pop out the rubber plug(s).
How to install Stick Up Cam on a wall: Remove the mounting bracket. Slide it down to remove it from the base. Remove the base. Unscrew it using a standard Phillips-head screwdriver (not included). Drive the screws. Re-attach the base. Screw it into the back of your Stick Up Cam with the “UP” arrow on the bracket pointing upward. 8 Hold the bracket against your wall, making sure the “UP” arrow is pointing upward, and mount it with the included screws.
Mount your Cam. To install the base screw... Guide the grooves in the base onto the hooks on the bracket. Slide Stick Up Cam down to secure it to the wall. First, slide your Stick Up Cam off of the mounting bracket. Pop the rubber plug out of the base, then place Stick Up Cam back on the bracket. Secure with one of the provided screws. Check it out! To install the battery compartment screw...
For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. © 2019 Ring LLC or its affiliates. Ring and all related logos are trademarks of Ring LLC or its affiliates.
