Steplight Smart Lighting
1. S et up your Steplight. Set up your Ring Bridge. Download the Ring app. To set up your Bridge, follow the instructions in the Ring app or the Bridge user manual. The Bridge connects your Ring Smart Lights to the Ring app and the rest of your Ring devices. The app walks you through setting up and managing your Ring Steplight. Search for “Ring” in one of these app stores, or visit: ring.
Insert the batteries. Set up your Steplight in the Ring app. Using a flathead screwdriver, remove the screws from the back and lift off the battery lid. In the app, tap Set Up a Device. Then insert three C Cell batteries (not included), matching the flat ends with the springs. When prompted, select Smart Lights and follow the in-app instructions.
2. Install your Steplight. Insert screws. Drive the two mounting screws, leaving ~1/4” exposed. Attach the lid. Push the lid back onto your Steplight, and secure it with the screws you removed earlier. Mark the screw holes. Mount Steplight. Using the guide below, make a mark on the mounting surface below each arrow. Place your Steplight over the mounting screws and slide downward to lock it in place. If installing on a masonry surface, drill pilot holes and insert the included anchors.
For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents © 2019 Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates.
