Spotlight Smart Lighting
1. S et up your Spotlight. Set up your Ring Bridge. The Bridge connects your Ring Smart Lights to the Ring app and the rest of your Ring devices. To set up your Bridge, follow the instructions in the Ring app or the Bridge user manual. Download the Ring app. The app walks you through setting up and managing your Ring Spotlight. Search for “Ring” in one of these app stores, or visit: ring.
Insert the batteries. Set up your Spotlight in the Ring app. Twist and pull off the front of the light, then press the buttons on the top and bottom of the battery compartment to open. In the app, tap Set Up a Device. When prompted, select Smart Lights and follow the in-app instructions. Once setup is complete, you can replace the front of your Spotlight. Doorbells Insert four D Cell batteries (not included), matching the flat ends with the springs. Line up the arrows on the lid and compartment.
2. Install your Spotlight. Remove the base. Hold the base firmly against the surface and drive the three mounting screws. Loosen the locking screw on the base and remove the base from your Spotlight. Lock it in. Mark the pilot holes. Insert your Spotlight back into the base at your chosen angle and tighten the locking screw. If installing on a masonry surface, use the base as a template to mark pilot holes. Then drill the holes and insert the included anchors. 6 Drive the screws.
For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents © 2019 Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates.
