Owner's Manual

Before you begin, make sure Bluetooth is
enabled on your mobile device.
Now you're ready to set up your Alarm Base Station
in the Ring app. Here's how:
1. Tap Set Up a Device.
2. If this is your first ever Ring Alarm, tap Alarm.
If you have Alarm at another location, tap
Security Devices.
3_ Select a location, or add a new one.
4. Tap Base Station.
s. Follow the in-app instructions to
complete setup.
When prompted, press the PAIRING button on the
rear of your Base Station, as shown below.
TIP
The first time your Base Station connects to the
internet, it will automatically begin a software
update, which may take a few minutes.
During the update, the light ring on your Base
Station glows blue with a spinning yellow
indicator. Once the ring is solid blue, the
update is complete.
············~····························•·1
PAIRING
Rear of Base Station