Owner's Manual

Motion Detector
Motion Detectors are designed to be smart. They
allow you to move freely through your home while
also being ready to detect r:17ovement through
rooms and hallways when armed.
When working normally, Motion Detectors detect
motion constantly, but will only notify you to the first
detection. After three to four minutes of no activity,
it will be ready to notify you again. You can arm your
Alarm in Away Mode during this period, and it will
detect intruders.
In Test Mode, motion is constantly detected, and
will notify you about every 15 seconds. Test Mode is
designed to help you test for blind spots, pets,
and other environmental triggers.
'4
Where should you place your Motion Detector?
• Install 7' 6" above the floor, if possible.
• Install in a corner or on a flat wall
(see illustrations).
• Choose a location with a clear line of sight,
with no obstacles or blind spots.
To avoid false alarms:
• The Detector should not face a heat source such
as a stove, fireplace or windows with direct sun.
• Use the app to adjust motion sensitivity
to accommodate many pets.
• Make sure your pets can't get close to the
Motion Detector by climbing on furniture .
• The Detector should be armed in Away Mode,
but disarmed in Home Mode. This is the default
setting.