Full Product Manual

1716
Keypad
You’ll use your Keypad to arm and disarm your
Alarm, so we recommend you place it in the
hallway or near the door you most often use
to exit and enter.
Some people install an extra Keypad in their
bedroom for easy access at night.
To use the Ring Keypad on a table:
• Slide the bracket o the Keypad.
• Flip the bracket over, then slide it
back onto the Keypad.
To install the Ring Keypad on a wall:
• Slide the bracket o the Keypad.
• Place the mounting bracket on the wall, then
use the wall anchors and screws from your kit to
fasten the bracket to the wall. (If using anchors,
you should pre-drill holes.)
• Slide the Keypad onto the bracket.
Install Steps;
. Connect
When prompted by the app, plug the Keypad
into an outlet with the included USB cable and
wall adapter.
. Configure
Give your Keypad a unique name and add it to
a room. Don’t forget, you must create a personal
access code to arm and disarm your Alarm.
. Install
The Keypad can be mounted flush on a wall or
placed on a table, and can be left plugged in or
run on its internal battery.