Full Product Manual

76
. Set up your Alarm.
Ready to pair
Spinning
Blue
Climbing
White
Solid
Blue
Solid
White
Flashing
Blue
Flashing
White
Pairing successful Pairing failed
Connecting to wifi Connected to
wifi or Ethernet
wifi network
connection failed
LED patterns during pairing
LED patterns connecting to internet
Once your Base Station is set up, you can tell its status by the color
and pattern shown on its light ring. See a pattern not shown here?
Visit ring.com/alarm-faq for more information.
Before you begin, make sure Bluetooth is
enabled on your mobile device.
Now you’re ready to set up your Alarm Base Station
in the Ring app. Here's how:
. Tap Set Up a Device.
. If this is your first ever Ring Alarm, tap Alarm.
If you have Alarm at another location, tap
Security Devices.
. Select a location, or add a new one.
. Tap Base Station.
. Follow the in-app instructions to
complete setup.
When prompted, press the PAIRING button on the
rear of your Base Station, as shown below.
TIP
The first time your Base Station connects to the
internet, it will automatically begin a software
update, which may take a few minutes.
During the update, the light ring on your
Base Station glows blue with a spinning yellow
indicator. Once the ring is solid blue, the
update is complete.
Rear of Base Station