Full Product Manual

2120
How to Arm and Disarm
your Ring Alarm
Using the Keypad
Enter your personal access code, and then press
the Disarmed, Away, or Home Mode button.
Using the app (Ring Protect required)
Open the app and tap your Mode of choice.
Bypassing Sensors
The bypass feature allows you to temporarily ignore
a Sensor so can arm your Alarm without triggering
it. The feature is most often used when you want
to leave a window open or ignore a device issue to
resolve at a later time.
Using your Keypad
When you try to arm and need to bypass a Sensor,
your Keypad will announce “Sensors require bypass”
and the
button will blink. Pressing the button
to bypass, or to cancel arming, do nothing.
Using the app (Ring Protect required)
If you try to arm your Alarm and a Sensor needs to
be bypassed, you’ll get a notification.
Choose which Sensors are
armed in each mode
Each Security Mode arms specific groups
of Sensors. By default:
• Away Mode arms all Contact Sensors
and Motion Detectors.
• Home Mode arms only perimeter Contact
Sensors on doors and windows.
You can customize which Sensors are armed in
Home and Away Mode. For example, if you want
to avoid arming a specific door while in Home
Mode, you can use Mode Settings to change this
default setting.
Sensors monitored
in Away Mode
Sensors monitored
in Home Mode
TIP
Disarming will cancel your alarm signal.
If you’re professionally monitored, disarming
the system during an alarm cancels the signal
sent to the monitoring center.
(Ring Protect required)
In an emergency, if you want to silence the
alarm without canceling the alarm signal, tap
the Silence Siren button in the app.