NOVEMBER 2005 DIGITAL ANNUNCIATOR DISPLAY DAD104 Ring Communications Inc. Digital Annunciator Display DAD104 RING COMMUNICATIONS, INC.
NOVEMBER 2005 2 DIGITAL ANNUNCIATOR DISPLAY RING COMMUNICATIONS, INC.
NOVEMBER 2005 DIGITAL ANNUNCIATOR DISPLAY DAD104 TABLE OF CONTENTS DAD104 DIGITAL ANNUNCIATOR DISPLAY .............................................................................. 4 INTRODUCTION ............................................................................................................... 4 LOCATION AND DESCRIPTION OF CONTROLS .......................................................... 4 EXPLANATION OF THE DISPLAY LINE .....................................................................
NOVEMBER 2005 DIGITAL ANNUNCIATOR DISPLAY DAD104 DAD104 DIGITAL ANNUNCIATOR DISPLAY INTRODUCTION The Digital Annunciator Display (DAD104) provides annunciation of ALARMS, CALLS and FAULTS for programmed, supervised stations. Handling is accomplished by single keystrokes. Four 12-character alpha-numeric DISPLAY LINES clearly indicate the annunciated extension numbers and location description. An audible tone accompanied by the flashing display line alerts the operator to annunciated events in queue.
NOVEMBER 2005 DIGITAL ANNUNCIATOR DISPLAY DAD104 PARK KEY - Used to place handled annunciations in the PARK state for further handling by the same or a different display location. SPARE KEY - Used for Remote Control. This key will send an event to the DXC and the DXC will send DTMF number 5 to the connected intercom station. If the connected intercom station is equipped with a DTMF decoder and a relay (AN912RR) then the relay can be used to control a remote function such as door-unlock.
NOVEMBER 2005 DIGITAL ANNUNCIATOR DISPLAY DAD104 idle and may be used in normal intercom mode. See TRIDEX operation information supplied with central exchange. INCOMING EVENT - The DISPLAY lines When the DAD104 receives a event, a display line will flash and an audible tone will be heard. The first event will be displayed on the top line, additional events of equal or lower priority will be inserted into the queue in the order they were received.
NOVEMBER 2005 DIGITAL ANNUNCIATOR DISPLAY DAD104 REMOTE CONTROL - The Unmarked key This key is used for Door Lock Control of the connected Substation. DXC901 sends DTMF tone 5 to Substation. DXC910 sends DTMF tone 5 to Substation. DXA100 sends out event REMCON. CANCEL A CONNECTION - The CANCEL key When the intercom call is completed, press the CANCEL key on the DAD104, this will cancel both the intercom channel and the event on the current DISPLAY LINE.
NOVEMBER 2005 DIGITAL ANNUNCIATOR DISPLAY DAD104 SET SYSTEM TIME/DATE The Time and Date menu is accessed with the following key sequence: PARK - REMOTE CONTROL - PARK - REMOTE CONTROL Use the SCROLL keys to move through the menu. Use the ANSWER keys to Increment or decrement Time, Date or other options. Change: Time, Date, Clock ON/OFF and Language select (English, German, French). The CANCEL key exits the menu. No keys pushed for 30 seconds also exits the menu.
NOVEMBER 2005 DIGITAL ANNUNCIATOR DISPLAY DAD104 DAD104 0128 CAR 4C 0101 Door 4 0236 Lobby Answer keys 1 Queue of calls 0116 CAR 3A 2 Number of calls in queue 8 06 P 09:18:45 U D Clock/ Transfer status X 5 Remote control key 6 Park key 7 3 Cancel key Queue scroll keys RING COMMUNICATIONS, INC.
NOVEMBER 2005 DIGITAL ANNUNCIATOR DISPLAY DAD104 INSTALLATION . The DAD104 operates on +24 VDC. It can be powered from the central exchange or can be powered locally by a separate 24 VDC regulated power supply. The recommended cord is the BF640A to connect the DAD104 to the RJ45 network jack, KB171. Cords and jacks must be ordered separately. 1 - 8 pin (RJ45) Network connections : One modular jack is provided at the back of the DAD104.
NOVEMBER 2005 DIGITAL ANNUNCIATOR DISPLAY DAD104 Back-Box The DAD104 can be mounted into a desk (BBD905), flush (BBF863) or surface (BBS863) back box. When panel mounting the DAD104 for use in a console or control panel, a back box may not be necessary but can be used to enclose the DAD104 electronics if protection is required. REAR LED INDICATORS . RUN -Indicates the local processor in the DS16 is running. Will illuminate after power up or reset.
