User guide

Gemini Utilities

The Rimage Gemini Utilities program is used to update the controlling autoloader’s

firmware and to check the number of discs printed. It can also be used to change the

serial number of the autoloader and the name of the Endeavor.

You must close Production Server before starting Gemini Utilities.

To start Gemini Utilities, select Windows'

Start|Programs|Rimage|Utilities|Gemini

Utilities. When the autoloader is found, the Gemini Utilities dialog displays:

Enable/Disable Warning Beeper

Use the Gemini Utilities version 5.2.7.0 or above to enable the front panel LCD error

warning beeper. Set the

#of Beeps on Fault selection as desired. The factory default

setting is 0 beeps (beeper disabled).

GemUtil Help

To open the GemUtil online help system, place the cursor over a Gemini Utilities item

and then press the keyboard F1 key. Click on

About to check the version. Click on Exit

to close the Gemini Utilities program. The

Status area provides the results of the last

attempted operation.