User guide

5. EVEREST PRINTER WARMING UP – The Everest printer takes about 5

minutes to warm up when it is first powered up. The LED is no longer

flashing.

6. EVEREST ENDEAVOR READY

If any error messages occur during the power up sequence, refer to the possible error

messages on page 28.

Note: The carrot symbol (^) in the upper right corner of the display indicates the

Production Server is currently communicating with the Endeavor.

Remove Discs from Output Tray

Remove discs from the output tray by gripping the disc from the lowest edge as shown.

If the disc is grabbed from the front edge, the disc above it may be lifted up over the

stop of the output tray and slide out.

 Lowest Edge Front Edge ! Stop