User guide

22. Right-click the Printer icon and select Properties to display the Rimage Perfect
Image CD Printer Properties dialog box.
23. Select the Device Settings tab to display the default settings.
24. To set the printer to match the disc surface, select Media Type and then Regular
or Matte in the Media Type Setting.
25. To change the Master Printstrobe value of 400, select a new value with the Print
Strobe spin box or type in the value. Before you change this, we suggest reading
the discussion of “Optimizing Print Quality” on page 36.
26. Select the type of ribbon installed. The factory ships the printer with a color
ribbon installed.
If you change the ribbon to a monocolor ribbon and you are using a non-lacquer
surface disc, enable double printing. Double printing prints the image a second
time, which improves the quality of printing on matte media.
70