User guide

18. Select CD Printer as the default printer.
19. Select No to the test page question, and then select Finish.
20. If a message displays asking for the Windows 95/98 CD-ROM, remove the Rimage
driver disk and insert the Microsoft Windows 95/98 CD-ROM or disk 10 of the
Microsoft Windows 95/98 distribution disks, then select OK.
21. Once Windows 95/98 creates a new printer icon in the Printers window, click the
printer icon, and then select Properties in the File menu.
22. Select the Paper tab.
23. To set the printer to match the disc surface, select Regular or Matte in the Media
Choice box.
24. Select the Device Options tab.
25. To change the default print strobe value of 400, select a new value with the Print
Strobe scroll bar. Before you change this, we suggest reading the discussion of
“Optimizing Print Quality” on page 36.
26. To enable double printing, which prints the image a second time (at 90% of the
print density printed the first time), select Double Print. Double Print improves
the quality of printing on matte media. (Monocolor only.)
27. Enable RLE Compression. RLE Compression evens out printing speeds and
improves the print file download. RLE Compression does not work with Version
1.04 or earlier firmware.
28. The Enable Detect Media Change option is crucial, depending on whether you
are printing to a stand-alone printer or to a printer mounted on a transporter.
When enabled, this parameter requires the printer to detect a disc change between
prints. When printing multiple copies, this prevents a single disc from being
printed multiple times.
Do not enable if the CD printer is a mounted a Rimage transporter.
29. Select OK.
30. Select Spool Settings.
31. Select Print Directly to the Printer.
32. Select OK to close the Spool Settings.
33. Select OK to exit the print driver.
66