User guide

Error Problem Solution

15 Printhead Integrity

Check

Replace the printhead.

The printhead is checked every time the drawer is opened without a

disc present on the tray—an electrical continuity test is conducted

on each element in the printhead.

The Power LED will turn off if a bad element is detected. The

Power LED will turn back on if a disc is placed on the tray.

You can still operate the printer with this error, but the quality of the

printed image may be affected by the bad element.

However, if you are printing through an automated system (such as

the Rimage Producer or Amigo systems), this error will stop

operation to prevent the automatic printing of numerous labels by a

bad printhead.