User guide

8. If using a monocolor ribbon and the printed disc has voids, or is missing dots, set

the printer driver to Double Print. The Double Print setting prints the image

twice to fill in the small pits of a matte surface disc. Double print only works when

the print driver is set to a monocolor ribbon.

Windows 2000 Windows 95/98

9. If the printed image is too dark or too light, and you are using Windows NT or

Windows 2000, go to Halftone Settings on the next page. If you are using Windows

95 or 98, go to section Controlling Print Intensity with Windows ’95/98 Print

Drivers on page 33.

10. The Perfect Image CD Printer Driver also has other print control options that do

not affect print quality:

• RLE Compression — Enabling the RLE compression option decreases the

file size, which decreases the download time.

• Detect Media Change — This option should only be enabled for standalone

printers. DO NOT enable this option when the CD printer is connected to a

Rimage transporter.

This option causes the CD printer to ensure that a new disc is changed

between each label printing. The user must remove and replace the disc, then

press the Unit Attention button to continue printing. This is best for printing

multiple copies of the same image. See page 35.

11. Select OK to save the changes.

12. The Print Resolution can be changed in the Document Properties.