User guide

6. Select RLE Compression so there is a check mark in the box. This speeds up the

data transfer to the printer and does not affect the print quality.

7. Select Print Strobe setting and set a value from 400 to 500 by sliding the

indicator, or entering the value in the box at the upper portion of the dialog box.

See page 36 for recommended settings.

8. Select Detect Media Change Setting, and select No if using Rimage’s

transporters. Select Yes if printing multiple copies to a standalone printer.

With the Detect Media Change option enabled, the printer waits for the user to

remove the printed CD-R before attempting to print the next label on the same

label. The CD must be removed from the print pad and a new CD placed on the

pad within 5 seconds or the software displays an error message.

9. At the Installed Ribbon window, select Color.

10. Disable Perfect Print option. This option is used for Rimage’s AutoPrinter.

11. Do not select Using Rimage AutoPrinter. This is used only with the Rimage

AutoPrinter.