User guide

12. Disable Perfect Print option. This option is only used for Rimage’s AutoPrinter.

13. Select Halftone Setup to make changes that affect color intensity, color balance,

or pattern settings. See “Win NT Halftone Settings” on page 41.

14. Select OK to save the changes.

15. If using any other software, you can go right to the printing function. If using CD

Designer, go to the next section to the printing function.

Setting up Multicolor and Two-Color Printing on Windows

2000

If printing CDs from a Rimage transporter and using Production Server 2000, version

1.11 or higher, some of these parameters are set in the parameters of the Production

Server 2000 application. The Production Server’s parameters override settings made

here.

1. Install a multicolor ribbon in the CD Printer.

2. Select Window’s Start button.

3. Select Printers from the Settings menu.

4. Right-click on Rimage Perfect Image Printer PF and select Properties.

5. Select the Device Settings tab.

6. Select the Installed Ribbon option and select the type of ribbon that is installed

in the printer at the lower portion of the dialog box.

7. At the Change Installed Ribbon Setting, select Color (three panel CMY) or

Spot Color (two panel).

8. Select Media Type setting and select Regular.

9. Select Master Print Strobe setting and set a value from 350 to 550 by holding

down the mouse button down on the spinbox at the lower portion of the dialog box.

See “Optimizing Print Quality”, page 36, for recommended settings.