User guide

The Enable Color Sub-Strobes option can be enabled to individually change the

each color strobe. This may require multiple printings on CDs to adjust the color

hue. Generally, the yellow strobe is about 25 microseconds less that the other

settings.

10. Select RLE Compression and select Yes. This speeds up the data transfer to the

printer and does not affect the print quality.

11. Select the Detect Media Change Setting and select No if using any of the

Rimage transporters. Select Yes if printing multiple copies to a standalone

printer.

With the Detect Media Change option enabled, the printer waits for the user to

remove the printed CD-R and a new CD to be placed on the print pad before

attempting to print the next label on the same label. The CD must be removed

from the print pad and a new CD placed on the pad within 5 seconds, or Windows

may display an error message.