User guide

Rimage DL5200/DLN5200 User Guide
Learn More
Rimage DLN5200/DL5200 specifications
 Note: For printer specifications, refer to your Everest Printer User Guide or PrismPlus! Printer
User Guide.
Rimage DLN5200
Two disc recorders, Rimage DLN5200 autoloader, an Everest printer,
a network-ready embedded PC, and Rimage software.
Rimage DL5200
Two disc recorders, Rimage DL5200 autoloader, an Everest printer,
and Rimage software.
Input Bin Capacity
One removable 50-disc bin.
Output Capacities
Five single-disc output trays and one 75-disc output bin.
Rimage DLN5200
(Embedded PC)
Celeron D 340 processor with 533Mhz Front Side Bus
512MB DDR2-400, SDRAM
Windows XP Embedded with Service Pack 2
Two 36 GB, Serial ATA, 10,000 RPM, 8 MB cache, Hard Drives
Rimage DL5200 PC
requirements
Pentium 4 2.8 GHz, 512MB L2 Cache , 800MHz FSB
512MB DDR2-200, 400Mhz Bus
Microsoft Windows® 2000 Professional Service Pack 4, Microsoft
Windows XP Professional Service Pack 1or 2, Windows Server 2003
Rimage recommends 4 hard drives – One for the OS, one for the
Rimage System Folder, and two for caching (one for each recorder).
One open PCI slot for the provided FireWire®/USB card.
Height
23.25 inches (59.1 cm)
14.5 inches (36.8 cm)
Allow an additional 2.4 inches (6.1 cm) of space for the door to swing
open.
Width
Depth
23.5 inches (59.1 cm)
Allow an additional 2.5 inches (6.4 cm) for cabling in the rear of the
autoloader.
DLN5200 Weight
51 lbs (23.2 kg) without Everest printer, 95 lbs. (43.2 kg) with Everest
printer.
DL5200 Weight
44.5 lbs (20.2 kg) without Everest printer, 88.5 lbs. (40.2 kg) with
Everest printer.
Power
100 – 240VAC, 60/50 Hz, 4.7 – 3.7 Amps
Operating
Temperature
60° – 80º F (15.5º – 26.7° C)
40–80% non-condensing
Humidity
17