User guide

Important Information
DL5200/DLN5200 Specifications
 Note: For printer specifications, refer to your Printer User Guide.
Standard system Rimage DL5200 autoloader, an Everest printer, and Rimage software.
Rimage DLN5200 autoloader, an Everest printer, a network-ready embedded PC, and Rimage
software.
Rimage DL5200 Rimage DLN5200
Number of Recorders 2 2
Software
requirements
DL5200: Pentium 4 2.8 GHz, 512MB L2 Cache , 800MHz FSB
512MB DDR2-200, 400Mhz Bus
Microsoft Windows® 2000 Professional Service Pack 4, Microsoft Windows XP Professional
Service Pack 1or 2, Windows Server 2003
Rimage recommends 4 hard drives – One for the OS, one for the Rimage System Folder, and
two for caching (one for each recorder).
One open PCI slot for the provided FireWire®/USB card.
Ships with the correct software installed on the embedded PC. Operate only with the Rimage
software installed on the embedded PC.
DLN5200: Celeron D 340 processor with 533Mhz Front Side Bus
512MB DDR2-400, SDRAM
Windows XP Embedded with Service Pack 2
Two 36 GB, Serial ATA, 10,000 RPM, 8 MB cache, Hard Drives
Operates only with the Producer Software Suite.
Input bin capacity One removable 50-disc bin.
Output capacity Five single-disc output trays and one 75-disc output bin.
Physical size
DL5200 DLN5200
Height
23.25 inches (59.1
cm)
23.25 inches (59.1
cm)
Width*
14.5 inches (36.8 cm)
14.5 inches (36.8 cm)
Depth**
23.5 inches (59.1 cm) 23.5 inches (59.1 cm)
Weight
44.5 lbs (20.2 kg) 51 lbs (23.2 kg))
Weight with
Everest
88.5 lbs. (40.2 kg) 95 lbs. (43.2 kg))
* Allow an additional 2.4 inches (6.1 cm) of space for the door to swing open.
** Leave an additional 3.5 inches (9 cm) for cabling.
Supported
operating systems
DL5200: Microsoft Windows® 2000 Professional Service Pack 4, Microsoft Windows XP
Professional Service Pack 1or 2, Windows Server 2003.
DLN5200: The DLN5200 has an embedded operating system. The DLN5200 and software will
function only with the embedded operating system.
Power 100 – 240VAC, 60/50 Hz, 4.7 – 3.7 Amps
Temperature and
humidity
Operating Temperature
60° to 80º F (15.5º to 26.7°
C)
Humidity
40% to 80% non-condensing
Storage Temperature
5° to 95° F (-15° to 35° C)
Networking ability Refer to the Rimage Advanced Setup Guide for instructions on submitting orders from a
networked computer.
Media
requirements
Refer to your printer user guide for the correct media requirements. Rimage Media Kits™ are
designed for optimum recording and print performance.
110768_F 5