User guide

Operate the Rimage DL5200/DLN5200

Power On

Before you begin:

Set up the Everest printer. For more information, refer to the

Rimage Everest Printer™ setup guide.

Power on the Rimage DLN5200

1. Ensure the PC power switch is in the on

position.

PC Power

Switch

2. Press the main power switch on the rear of the

autoloader to power on the autoloader.

 Note: After powering on the autoloader, the

printer initializes.

Power Switch

3. Press the PC power button on the front of the

autoloader to power on the embedded PC.

When the DLN5200 autoloader has completed

the initialization, the operator panel displays

RIMAGE DLN5200 READY.

PC Power

Button

Power on the Rimage DL5200

Before powering on the computer attached to the DL5200,

power on the DL5200 by pressing the main power switch.

When the DL5200 autoloader has completed the initialization,

the operator panel displays RIMAGE DL5200 READY.

Power Switch

110768_F 11