Manualshelf

User guide

ManualsBrandsRimage ManualsComputer equipmentDLN5200
11121314151617181920
Operate the Rimage DLN5200/DL5200
Operate the Rimage DLN5200/DL5200
Powering on
Before you begin:
Set up the Everest printer. For more information, refer to the Everest Printer Unpacking and
Setup Guide.
Powering on the Rimage DLN5200
1. Press the PC power switch to the ‘on’
position.
PC Power
Switch
2. Press the main power switch to the ‘on’
position.
Main Power
Switch
Note: After pressing the main power
switch to the ‘on’ position, the Everest
printer initializes.
3. Press the PC power button to power on
the embedded PC. When the DLN5200
autoloader has completed the initialization,
the operator panel displays RIMAGE
DLN5200 READY.
PC Power
Button
Powering on the Rimage DL5200
Before powering on the computer attached to the
DL5200, press the main power switch to the ‘on’
position.
When the DL5200 autoloader has completed the
initialization, the operator panel displays RIMAGE
DL5200 READY.
Main Power
Switch
110768_D 9