Installation guide

Rimage 2000i™ Knowledge Base

There are a lot of rejects.

1. Open Rimage System Manager.

2. From the toolbar, select Control Centers.

3. In the System Explorer panel, select the desired Production Server. The Production Server

information displays in the right panel.

4. Select Server Log.

5. Examine the log file for recorder errors. If present, see the

There are Recorder Failures

section of this document.

The finished disc has noticeable bands in the printed disc.

Banding can be improved by increasing the ink saturation in the Rimage 480i printer driver.

Select the appropriate directions to change the ink saturation:

Printing labels from CD Designer

 Note: If you are using CD Designer, printing preferences are saved with the label file and are

used instead of the printer driver settings.

1. Open the label file with CD Designer.

2. Select Print. The Printer window opens.

3. Select the Document Properties button.

4. Select the Colors tab.

5. Move the Saturation slider toward “vibrant.”

6. Select OK.

7. Close the Printer window.

8. Save the label file.

9. Print the label again.

Printing PDF files

When printing with Acrobat (.PDF) files, change the printing defaults in the printer driver.

1. From the Windows Start menu:

• Navigate: Settings > Printers in Windows 2000.

• Navigate: Settings > Printers and Faxes in Windows XP.

2. Right-click on the Disc Color Printer 480i.

3. From the drop-down menu, select Properties. The Disc Color Printer 480i Printing Properties

window opens.

4. Select the Advanced tab.

5. Select the Printing Defaults.

6. Select the Color tab.

7. Move the Saturation slider toward vibrant.

8. Select OK.

9. Print the label again.