Installation guide

Rimage 2000i™ Knowledge Base

The last disc does not print.

- Important! Try these solutions in the order they are presented.

• Rimage 2000i Software: Restart QuickDisc by closing the application and then starting it.

 Note: This solution works only for Rimage 2000i Software.

• OfficeNet Software Suite: Pause Production Server. Refer to the Rimage System Manager

Online Help for more information.

1. Open Rimage System Manager.

2. From the toolbar, select Control Centers.

3. Select the desired Production Server.

4. Select the Pause button.

5. Select the Start button.

• OfficeNet Software Suite: Change the cache settings. Refer to the Rimage System

Manager Online Help for more information.

Cache drives are hard drives that hold the temporary disc image file so that streaming the file

to the recorder is uninterrupted and underrun errors are less likely to occur.

1. From the toolbar, select Control Centers.

2. In the System Explorer panel, select the desired Production Server. The Production

Server information displays in the right panel.

3. From the Settings window, select the Caching tab. You can view the cache settings from

this tab.

4. If necessary, change the settings.

• Use Static Caching – When this option is enabled, the Production Server allocates

two full image cache files per recorder of the largest size the hardware is capable of.

On systems with DVD drives and OfficeNet Software 7 or later, this will be dual-layer

DVDs.



age creation error occurs when the software cannot save the large image

•

ve for each recorder. No comma

5. ngs, select OK to save your

changes or Cancel to exit without saving any changes.

Note: Enable static caching only if you have sufficient hard drive space. If this

option is enabled and the hard drive does not have enough cache drive space,

an im

file.

Cache drive letters – Add the drive letter of the cache drive to the Cache Drive

Letters field. You can use drive C: if you have one recorder and no cache hard

drives. Rimage recommends a dedicated cache dri

separators are required between the drive letters.

When you have completed viewing or changing the setti