Rimage 360i™ User Guide This manual provides the information needed to operate the Rimage 360i and identify the parts. To set up and install your Rimage 360i, refer to the Rimage 360i Setup and Installation Guide.
Corporate Headquarters: Rimage Corporation 7725 Washington Avenue South Minneapolis, MN 55439 USA European Headquarters: Rimage Europe GmbH Hans-Böckler-Straße 7 63128 Dietzenbach, Germany CD and DVD Recording Software Disclaimer This Product, Software, or Documentation may be designed to assist you in reproducing material in which you own the copyright or have obtained permission to copy from the copyright owner.
Rimage 360i Support information For Rimage 360i™ Support, go to: www.rimage.
Contents Contents Introduction ..................................................................................................................... 1 Requirements.............................................................................................................. 1 Software requirements .......................................................................................... 1 Operating system requirements ............................................................................
Rimage 360i Replacing the ink cartridges ................................................................................ 24 Learn More..................................................................................................................... 25 Rimage 360i Specifications ................................................................................. 25 Technical support and product updates .............................................................. 26 Safety information .....................
Introduction Introduction This manual provides the information needed to operate the Rimage 360i and identify the parts. To set up and install your Rimage 360i, refer to the Rimage 360i Setup and Installation Guide. Requirements Software requirements Windows-based PC The Rimage 360i will operate only with the Rimage 360i Software. Macintosh computer The Rimage 360i will operate only with the Rimage 360i software for Macintosh.
Rimage 360i Ink requirements - Important! You can use only Rimage ink cartridges in the Rimage 360i. The printer will work only with the following printer cartridges. The following cartridge combinations are supported. Left Position Right Position Description Rimage Part Number Color Black Black RB1 Color Photo Color RC1 Color No cartridge Photo RP1 No cartridge Black n Warning: 2 Ink may be harmful if swallowed. Avoid contact with eyes. Ink contains nitrites.
Introduction Label design requirements The Rimage 360i Windows compatible software includes a label editor called CD Designer™, which is installed on your PC during a typical installation of the Rimage software. If you have a Windows-based PC, you can use CD Designer to design your labels. Note: CD Designer is not Macintosh compatible and will not be installed with the Macintosh compatible software.
Rimage 360i Identify the parts of the Rimage 360i This section describes the Rimage 360i hardware and its features.
Identify the parts of the Rimage 360i Rimage 360i Buttons On the right side of the Rimage 360i, there is one button. Pause button • Press this button once to pause the Rimage 360i. • Press this button again to return to normal operation. Inside the front cover of the 360i, there are three buttons. To access these buttons, open the front cover. n Warning: Touch only the buttons indicated below. Touching the inner parts of the 360i may cause equipment failure or injury and may void your warranty.
Rimage 360i Rimage 360i Project Status Indicator (PSI) On the front of the Rimage 360i is the Project Status Indicator (PSI), made up of 5 indicator lights. The PSI communicates Rimage 360i, disc, printer, and recorder status.
Identify the parts of the Rimage 360i Rear view Filter Cover Rear Cover Power Switch Power Cord Port USB 2.
Rimage 360i Operate the Rimage 360i This section provides the information that you need to produce CDs or DVDs with the Rimage 360i. Powering on the Rimage 360i 1. To power on the Rimage 360i, press the power switch on the rear of the Rimage 360i. The Rimage 360i initializes. 2. To power off the Rimage 360i, press the power switch again. Pausing the Rimage 360i Before you load or unload discs from the Rimage 360i, you must pause it. 1. To pause the Rimage 360i, press the pause button once.
Operate the Rimage 360i Loading the discs 1. Open the input door. 2. Place up to 25 discs in the disc input with the printable side facing out. 3. Close the input door.
Rimage 360i Setting up your printing preferences on a Windows-based PC Printing Preferences allows you to set up and run your Rimage 360i to produce the best possible label on your discs. Through Printing Preferences, you can: # Tip: For additional information about these features, access the online help in Printing Preferences.
Operate the Rimage 360i Setting the print quality Use this procedure to change the print quality for your images, if necessary. 1. Navigate to Printing Preferences (refer to page 10). 2. Select the Disc/Quality tab. 3. In the Disc Options panel, select the appropriate Type from the dropdown list. 4. In the Print Quality panel, select the desired print quality. When you select a print quality, the following information about the quality displays: • Black render dpi • Color input dpi • Color output 5.
Rimage 360i Adjusting the ink volume used This functionality allows you to adjust the amount of ink that is used. 1. Navigate to Printing Preferences (refer to page 10). 2. Select the Basics tab. 3. Select Advanced Features. The Advanced Features window opens. 4. To increase or decrease the ink volume or dry time, move the Ink Volume and Dry Time sliders. - Important! Do not select the Low Memory checkbox. 5. Select OK. The Advanced Features window closes. 7.
Operate the Rimage 360i Changing the printable area settings Disc with stacking ring # Tip: Most discs with a This functionality allows you to adjust the non-printable area, or mask, settings for standard CD/DVD 120 mm media. This allows you to set the outer and inner diameters to print the disc without overlapping the disc edges. If you print on areas of the disc where the surface is not suitable for printing, the ink can smear or run. 1. Navigate to Printing Preferences (refer to page 10). 2.
Rimage 360i Aligning the ink cartridges For optimal print quality and maximum printing speed, use this procedure to align the ink cartridges. 1. Navigate to Printing Preferences (refer to page 10). 2. At the Rimage 360i, open the front cover. 3. Press the green (middle) button. The printer tray opens. 4. Align the ink cartridges. 5. a. From the Disc Color Printer 360i Printing Preferences window, select the Service tab. b. Select Service ToolBox. The Rimage Service Toolbox window opens. c.
Operate the Rimage 360i Centering the image on the disc The Rimage 360i provides two ways to center the image on the disc. You can use the Auto Centering method or the Manual Centering method. The Auto Centering method is accurate to within +/- 0.5 mm. You can improve the centering position accuracy with the manual centering adjustment to better than +/- 0.2 mm. For optimal print quality, use the following procedure to center the image on the disc.
Rimage 360i Setting up your printing preferences on a Macintosh computer Printing preferences allow you to setup your Rimage 360i to print the best possible label on your discs.
Operate the Rimage 360i Setting the print quality and color options Use this procedure to set the print quality for your disc. 1. Navigate to Printing Preferences (refer to page 16). 2. From the presets popup pane menu, select Disc Type/ Quality. The Disc Type/Quality pane displays. 3. View or change the printing preferences. a. From the Disc Type dropdown list, select the appropriate type. b. From the Quality dropdown list, select the desired print quality. c.
Rimage 360i Changing the printable area settings This functionality allows you to adjust the printable area settings for CD/DVD 120 mm media. This allows you to set the outer and inner diameter to print the disc without overlapping the disc edges. If you print on areas of the disc where the surface is not suitable for printing, the ink can smear or run. 1. Navigate to Printing Preferences (refer to page 16). 2. From the presets popup pane menu, select Printable area settings.
Operate the Rimage 360i Aligning the ink cartridges For optimal print quality and maximum printing speed, use this procedure to align the ink cartridges. - Important! For maximum printing speed, align the ink cartridges upon initial installation and each time you replace the ink cartridges. 1. Navigate to the printer utility. a. From System Preferences, select Print & Fax. The Print & Fax window opens. b. If you are using OS X v10.3, in the Print & Fax window, select Set up Printers.
Rimage 360i Centering the image on the disc For optimal print quality, use this procedure to center the image on the disc. # Tip: Use this procedure only if the printed image is not centered on the disc. Image centering is set at the manufacturer and usually does not need to be recalibrated in the field. 1. Navigate to the printer utility. a. From System Preferences, select Print & Fax. The Print & Fax window opens. b. If you are using OS X v10.3, in the Print & Fax window, select Set up Printers.
Maintain the Rimage 360i Maintain the Rimage 360i The procedures in this section will help keep your Rimage 360i in optimum operating condition. General Cleaning # Tip: To keep your Rimage 360i clean, keep it in a dust free environment. 110808_D Cleaning the exterior If your Rimage 360i becomes dusty: 1. Power off the Rimage 360i. 2. Wipe the exterior with a damp, lint-free cloth.
Rimage 360i # Tip: Use only Rimage inkjet print cartridges and, for best results, follow the guidelines below: • • Keep print cartridges sealed in the original package until they are needed. Store print cartridges at room temperature (60 - 78 degrees F or 15.6 to 26.6 degrees C). • Store print cartridges in an upright position - not on their sides or upside down. • Do not remove the protective tape from a new print cartridge until just before you install it.
Maintain the Rimage 360i Replace Consumables Replacing the fan filter The fan filter is a consumable item. You will need to change the fan filter after 20 ink cartridges. Use this procedure to change the fan filter. 1. On the rear of the Rimage 360i, press the tab on the filter cover and lift up the filter cover. 2. Remove the filter. 3. Place the new fan filter in the fan filter retainer. 4. Firmly press the fan filter cover back into place.
Rimage 360i Replacing the ink cartridges Use this procedure to change the ink cartridges on your Rimage 360i. - Important! You must use the appropriate ink cartridges in one of the configurations listed on page 2. 1. Open the ink cartridge access door. The ink cartridge carriage moves to an accessible position on the carriage guide. 2. When the ink cartridge carriage is still, lift the ink cartridge latch to the open position. 3. Remove the installed ink cartridge. 4.
Learn More Learn More Rimage 360i Specifications Standard System One disc recorder, Rimage 360i with internal Rimage 360i Disc Color Printer assembly, and software. Software requirements Rimage 360i Software (Mac or PC) Input bin capacity 25 Discs Output capacity 25 Discs Physical size Width – 15.25” (38.7 cm) Height – 19.00” (48.3 cm) Depth – 20.00” (50.8 cm) Weight – 25 lb (11.
Rimage 360i Technical support and product updates Support for the Rimage 360i is available through your authorized reseller. - Important! Register your Rimage 360i online or complete and return the registration card so Rimage can notify you of upgrades as they become available. Safety information This manual and the indications on the product allow proper and safe operation. The indication marks below help protect you and other persons from injury, and equipment from damage.
Learn More Safety testing Product name: Rimage 360i Model: RAS17 Notice for USA Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Rimage 360i Rimage 360i Limited 1 Year Warranty Rimage warrants, to the original end user only, that all non-consumable parts of the Rimage 360i Autoloader products will be free from defects in material and workmanship for 12 months, according to the following terms: • Rimage will provide 30 days of free telephone support beginning on the day that the Rimage software is activated. Telephone support after the free 30 day period will be provided pursuant to Rimage’s then current standard support charges.
