Instruction manual

Instruction manual
Welcome to RILO
Instruction manual
Welcome to RILO
C. GAS SUPPLY
It should be of a galvanized iron pipe, nished with a valve with a screw top or thread
of ½”. The connection from the gas main valve to the machine gas valve has to be
done with a 5/16” copper pipe and a female ¼” coupling.
ATTENTION: In every case you should let run plenty of water, before you start op-
erating the machine in order to dispose the pipes from any residue that could have
been left during the contruction.
D. ELECTRIC ENERGY (UNDER-COUNTER CABINET)
All machine and coffee grinder components fuction at 220V C.A. 50/60Hz with ground
connection. (110 V C.A. only upon request) Install a 4 plug electrical outlet of 10A
for the coffee machine if it is gas heated. If the heating is dual or electric it should
be 20A
E. ELECTRIC ENERGY (OVER-COUNTER CABINET)
Take notice to use a 10º ground connectionfor the grinder.
F. WATER PURIFIER
It should have enough space under the counter (see section for its mainteinance)
G. KNOCK BOX
It should have enough space under the counter
H. DRAINING BOX
The ½” hose coming from the draining pipe should be inserted into the draining box
(A).
I. DRILLING OF THE COUNTER (WORK SPACE)
Present the coffee machine on the counter top and make a 80 mm diammeter perfo-
ration placed 500mm from the left side and 150mm from the front of the baseboard
of the machine.
IMPORTANT
It might happen unexpectedly or for any reason, that your water supply service is in-
terrupted, what would affect the normal functioning of your RILO coffee machine.
In order to avoid that certain components suffer serious damages, your RILO ma-
chine has been equiped with the innovative BA-3 system
.
4