Instruction manual

Instruction manual
Welcome to RILO
ENG
INSTALLATION
A. WATER DRAINING
A lead or plastic pipe of 1½” at least, should be attached to a ½” hose coming from
the drain box of the machine.
B. WATER SUPPLY
It Should end with a water valve with a screw top or a thread of ½”.If the machine has
a built-in pump connect to the valve an 8 mm rubber hose.In case the engine should
be separated, connect the hose to the pump entry.
ATTENTION: In every case you should let run plenty of water, before you start op-
erating the machine in order to dispose the pipes from any residue that could have
been left during the contruction.
3