Air Filtration System Owner’s Manual Model: 61-2400 Record the serial number and date of purchase in your manual for future reference. Serial number: Date of purchase: For more information: www.rikontools.com or info@rikontools.com For Parts or Questions: techsupport@rikontools.
Safety Warning IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following instructions must be followed at all times. There are certain applications for which this tool was designed. We strongly recommend that this tool not be modified and/ or used for any other application other than that for which it was designed. If you have any questions about its application, do not use the tool until you have contacted us and we have advised you.
ALWAYS DISCONNECT TOOLS. Disconnect tools before servicing and when changing accessories such as blades, bits, and cutters. ALWAYS AVOID ACCIDENTAL STARTING. Make sure switch is in “OFF” position before plugging in cord. NEVER LEAVE TOOLS RUNNING UNATTENDED. ALWAYS CHECK FOR DAMAGED PARTS. Before initial or continual use of the tool, a guard or other part that is damaged should be checked to assure that it will operate properly and perform its intended function.
Table of Contents Safety Warnings......................................................................................................................................2-3 Dust Collection Safety Rules....................................................................................................................... 3 Specifications.........................................................................................................................................................
Contents of Package Unpacking and Checking Contents Unpack your air filtration system from its carton and check to see that you have all of the following items. Do not turn your machine ON if any of these items are missing. You may cause injury to yourself or damage to your machine. 61-2400 Main Unit Hardware Air Filtration System Owner’s Manual Model: 61-2400 Record the serial number and date of purchase in your manual for future reference.
Getting to Know Your Air Filtration System 1 2 8 6 7 4 3 Item Description 1 2 3 4 5 6 7 8 Diffuser Primary Filter Secondary Filter Access Panel Switch Location Joist Hooks (x4) Eye Bolts (x4) Rubber Feet (x4) 5 Assembly The machine must not be plugged in and the power switch must be in the OFF position until assembly is complete. Tools Required for Assembly Item Description #2 Phillips Screwdriver 10mm Wrench Unpacking and Clean-up 1.
Assembly 1. Remove all packing and hardware from inside of the unit by removing the outer filter and inner filters. 2. The air filtration unit can be hung from the ceiling. Hang the unit using four eye bolts (A, Fig.01), and four joist hooks (B, Fig.01) provided. Unit can also sit on a bench by installing rubber feet provided. C A B Fig.01 ! WARNING ! Mounts must be anchored to building structure, which will support a minimum of at least 250 pounds.
Operation Manual Control: The air filtration system is operated manually. The control panel located on the side of the unit. The switch is operated by a pull chain (A, Fig.02). One pull turns on, a second pull turns unit off. A Fig.02 Tech Tip: If you plan on using the air filtration system on one speed, wire wall a switch inline to control the operation from a convenient location. Consult with a qualified electrician for proper circuit size.
Maintenance Changing the Filters ! WARNING ! To reduce the risk of injury disconnect the air cleaner from the power source (unplug) before servicing or changing filters. Failure to comply may cause serious injury! There are two main filters that need to be changed or cleaned periodically. A Fig.04 The outer filter can be removed by simply sliding it out of the filter track (A, Fig.04). There is an arrow indicating the air flow direction on the outer filter.
Accessories 61-900F 5 Micron Prefilter 61-901F 1 Micron Inner Filter 61-903C Inner Charcoal Filter Wiring Diagram WARNING:This machine must be grounded. Replacement of the power supply cable should only be done by a qualified electrician.
Electrical Requirements In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not modify the plug provided.
４ ３ ２ 1-ST4D2X13GB16824D1Z 12 1-JL76010000 ５ 1-JL76040006-091W 1-JL76040005-091W 1-JL76040004-091W １ ６ 1-JL76020000 ７ 1-JL76030000 ８ ９ JL79010009 ２０ １９ １８ 1-JL79010002 JL76090000 JL76040100 1-JL79000004 １７ １０ １６ １１ １５ 1-U23142300 １３ １２ 1-NT90-120CB 1-JL76040003-091W １４ 1-JL76040001-091W 1-JL76070000 1-HY42C 1-JL76040002-091W 1-JL76060000 Explosion Diagram
Parts List KEY No. Description Part No.
４Ａ ３Ａ 1-WSH6GB5287 Z ７Ａ ６Ａ ８Ａ 1-JL76060003 1-M8X50GB578 1Z 1-JL79060006 1-ST4D2X13GB 16824D1Z 14 ５Ａ 1-JL76060003 1-M6X35GB578 9Z ２Ａ 1-ST4D2X16GB 16824D1Z 1-JL79060004 １８Ａ 1-JL76061000 ９Ａ 1-M6X15GB/T1 7880D3Z 1-M8GB889Z １７Ａ ２０Ａ 1-G7212676-0 0001G １９Ａ １Ａ 1-JL76050000 １０Ａ 1-JL76060002 １１Ａ １５Ａ １２Ａ １４Ａ 1-JL76060004 １３Ａ 1-ST4D2X16GB 16824D1Z 1-M6X16GB578 9Z 1-M6GB6177Z 1-JL76060001 １６Ａ Explosion Diagram
Parts List KEY No. Description Part No.
Warranty 5-Year Limited Warranty RIKON Power Tools Inc. (“Seller”) warrants to only the original retail consumer/purchaser of our products that each product be free from defects in materials and workmanship for a period of five (5) years from the date the product was purchased at retail. This warranty may not be transferred. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear.
Notes Use this section to record maintenance, service and any calls to Technical Support: 17
For more information: 16 Progress Rd Billerica, MA 01821 877-884-5167 / 978-528-5380 techsupport@rikontools.com www.rikontools.com Copyright RIKON Power Tools, Inc.
