Owners manual

8
CONTENTS OF PACKAGE
B
A. Motor and Base Assembly
B. Sanding Disc Table
C. Disc Table Hardware
D. Disc Table Adjustment Hardware
E. Sanding Belt Table - Large
F. Sanding Belt Table - Small
G. Sanding Belt Table Hardware
H. Hex Wrench 8MM
Hex Wrench 2.5MM
I. Rubber Feet
J. Miter Gauge
K. Manual & Warranty Card
L. Steel Stand Components
A
ASSEMBLY
THE SANDER MUST NOT BE PLUGGED IN AND THE POWER SWITCH
MUST BE IN THE OFF POSITION UNTIL ASSEMBLY IS COMPLETE.
Tools Required for Assembly:
#2 Phillips Screwdriver
10mm or Adjustable Wrench
C
D
E
F
H
I
J
K
L
G
See pages
22-25 for full
Parts Diagrams
and Parts Lists
50-122
www.rikontools.com
50-122M1
6” x 48” Belt & 10” Disc Sander
Operator’s Manual
Record the serial number and date of purchase in your manual for future reference.
Serial Number: _________________________ Date of purchase: _________________________
For technical support or parts questions, email [e-mail] or call toll free at [phone]
226002